Patch Test Products

Clean Lube Solution’s portable Oil Patch Test Kits quickly and reliably monitor particulate contamination in hydrocarbon-based hydraulic fluids and lubricating oils.

breather adapters

Brochure

Testing of hydraulic and lubricating oils is an essential part of any efficient preventative maintenance programme. Fluid analysis is a snap shot of what is happening inside your equipment and is one of the most valuable indicators in cleanliness control.

The Clean Lube Solutions Patch Test Kit provides both solid and water contamination levels onsite in a matter of minutes which results in opportunities to optimise filtration performance, minimise machinery downtime and extend equipment life.

Patch Test Kit

The Clean Lube Solutions top quality Patch Test Kit comes as a complete setup packed in a wheeled Pelican 1620 Case (Black) with protective high density custom cut foam. The kit contains all that is needed to carry out indicative testing of lubricating and hydraulic oils.

Patch testing will provide you with contamination results that can be compared with the ‘Fluid Cleanliness Comparison Chart’ to assign an ISO Cleanliness Code. This chart and the comprehensive, illustrated instruction manual are included with the kit.

The complete kit is inclusive of all equipment to prepare analysis membranes as well as observe contamination / wear debris and inspect for contamination cleanliness code.

  • 1 Litre Vacuum Flask
  • Vacuum Pump
  • Pressurised Solvent Dispenser with Filter
  • Buchner Funnel, Clamp & Stopper
  • 5ml Syringes
  • Patch_Test_Kit__case__microscopePetrie Slides
  • Membranes (multi—various sizes & microns)
  • Full Colour Patch Comparator Book
  • Moulded Beakers 250ml & 500ml
  • Plastic Funnel 80mm
  • Air Hand Pump
  • Microscope – B200T with LED light & USB 3mp camera
  • Gloves (multi)
  • Tweezers
  • Plastic Tubing
  • Instruction Manual

This top quality Patch Test Kit comes packed in a wheeled Pelican 1620 Case (Black) with protective high density custom cut foam.
The microscope is inclusive of a USB2 camera and software to observe images in real time and 2 x LED light source.

Patch Test Station

Patch Test ProductsDescription:

The Clean Lube Solutions’ Patch Test Station provides an optimum environment in which to perform patch testing in a lube room or workshop environment. The station allows for dust free storage of patch testing equipment, thereby reducing the time to set up and perform patch testing. Electrical devices within the work area are designed for safe use around solvents as are the hazardous use internal light, external power receptacles, RCD and external storage for vacuum pump. – See more at: Click Here

The Clean Lube Solutions’ lockable, dedicated, Patch Test Station provides an optimum environment in which to perform patch testing in a lube room or workshop environment. The heavy duty station allows for dust free storage of patch testing equipment, thereby reducing the time to set up and perform patch testing. Electrical devices within the work area are designed for safe use around solvents as are the hazardous use internal light, external power receptacles, RCD and external storage for vacuum pump.

 This enclosed, wheeled unit may also be repositioned  to other locations as required.

Patch Kit Analysis Membranes (47mm x 1.2 Micron Grided)

Patch Test ProductsDescription:
1.2 micron x 47mm gridded analysis membranes suitable for patching most lubricating oils & fuels. Comes as a pack of 100 membranes.

Patch Kit Analysis Petri Slides

P/N LL-PK-PS

Patch Test ProductsDescription:
47mm petri slides suitable for holding analysis membranes for microscopic inspection. Comes as a pack of 100
slides.

Field Patch Test Kit

P/N LL-PK-PS

Clean Lube Solutions’ transportable, light weight Fluid Analysis Field Kit is designed with portability in mind. This complete oil sampling kit contains all you need to quickly and reliably monitor particulate contamination in hydrocarbon – based hydraulic fluids and lubricating oils.

CLS fluid analysis field kitBENEFITS & RETURN ON INVESTMENT

  • Compact light weight kit: Components on hand & safely packaged
  • Improvement cleanliness monitoring
  • Extend equipment life
  • Identify opportunities to optimise filtration performance
  • Minimize machinery downtime
  • Compatible with hydraulic, lube oils, diesel fuel & coolant
  • Prevent major failures
  • Cost effective
  • Mobile system
  • Simple, no fuss oil analysis technique
  • Provides results on site in a matter of minutes
  • Determines solid contamination level and particle types

Pelican 1620 Case (with handle & wheels)

caseFeatures:
• Ultra High Impact Polycarbonate Shell
• Double Throw Latches
• O-Ring Seal
• Rubber Over-Molded Handle
• Stainless Steel Padlockable Hasps
• Automatic Pressure Equalization Valve
• Chemical-resistant, Corrosion-resistant, Airtight, Watertight, Dustproof, Crushproof

Exterior Dimensions
:
62.59cm x 49.25cm x 35cm” (L x W x H)

Patch Kit Work Station

P/N LL-PK-BM200-1.3-WS

Patch Test ProductsDescription:
CLS Patch Kit Work Station is a complete patch test kit stored in a mobile work station/cabinet. Inclusive of all equipment to prepare analysis membranes, observe contamination / wear debris and inspect for contamination cleanliness code.

The heavy duty, mobile cabinet both stores the equipment and provides a working surface. The microscope is inclusive of a USB2 camera and software to observe images real time and 2 x LED light source. Full instructions and Patch Book are included.

Specifications:
Overall Dimensions: 1226mmW x 475mmL x 955mmH
Weight: Approx. 106 kg.

Patch Kit Solvent Dispenser Membranes (25mm x 1.2 Micron Grided)

Patch Test ProductsDescription:
1.2 micron x 25mm analysis membranes suitable for use in solvent dispenser.